Sirens

BaseAlert

BaseAlert uses a digital platform for emergency messaging: connecting to an activation center that simultaneously activates various warning tools, including sirens. BaseAlert sirens continuously monitor a server for messages, and are immediately and reliably activated when an appropriate trigger alert is posted. The alert message can be relayed in audible siren tone as well as voice format.

Standard equipment includes a NEMA4 Stainless Steel Siren control enclosure with enclosure mounting bracket and mounting hardware and:

• an attached isolated and ventilated battery compartment (for sirens with more than 400 Watt)
• a Class D Amplifier integrated with a high performance controller section,
• a conventional VHF or UHF radio and mounting hardware,
• an intrusion switch,
• a temperature compensated battery charger and
• a power ON/OFF circuit breaker

Optional Features

1. Pre-Recorded Voice Message Option (-DM)

   Includes a Digital Message board and message PROMs. The message are professionally recorded and then digitized. Available in blocks of 20, 40 or 80 individual messages. If additional messages are required consult the factory (up to 255 messages are possible).

2. Strobe Output Option (-STR)

   Controls a string of Strobe Lights of up to 10 amps of total current draw. Refer to the Strobe Selection Chart to order the Strobes separately.

3. Common Alert Protocol Activation Option (-CAP)

   CapCon Receiver monitoring two redundant servers.

4. Various speakers based on location and aesthetics.

Click here to download brochure.